Atlas Warm Gray Porcelain Floor-Tile
REF 566622591
* The photographs of products and environments are illustrative, some attributes may vary according to the resolution of your screen.
Price per square foot
Inspired by the imposing veins of Daino Reale marble applied in light tones tending to white, Atlas warm gray PORCELAIN TILE is a luxury for the senses; its richness and splendor is seen in each of its 12 differentiated faces that enhance the proposal and naturalness of the product. Atlas warm gray is matte finish, 11X22 inches format and ideal for general commercial use; it is also ultra-resistant to shocks, scratches, stains and humidity.
Presentation:
Warm Gray Porcelain Floor-Tile
- Product made in Colombia.
- Highly durable against bumps, wear, scratches, stains, abrasion and humidity.
- Easy to clean, no maintenance costs.
- It is anti-allergic and aseptic thanks to its waterproof surface, it prevents the proliferation of bacteria.
- High resistance to different disinfectant or cleaning agents.
- It doesn´t contain volatile organic compounds (VOCs) that cause a wide variety of health problems.
- Environmentally friendly due to its manufacture with natural, recyclable and renewable materials.
- It meets all the standards and requirements to be declared 100% Porcelain.
Product info
Special attributes
- Easy installation, cleaning and maintenance.
- With Digital Printing technology, design with greater definition.
- Ultra-resistant to bumps, scratches, stains and moisture.
Downloadable Content
Specs
| Serie | ATLAS |
| Material | Porcelain |
| Finish | matte |
| Look | Natural |
| For use in |
Residential
Commercial |
| Size | 11X22 |
| Sq. Ft Per carton | 16.9 in |
| Pieces Per carton | 10 pieces |
| Height | 11 in |
| Length | 22 in |
| Thickness | 0.327 in to 0.350 in |
| Guarantee | 12 |
Reviews
Recommendations
- The installation of cladding is one of the most important activities in the construction of clad floors and walls, since it is the most visible to the end user.
- Have a specialized person for the installation of porcelain tiles, with the knowledge and specialized equipment for it.
- It is recommended to use Pegacor® Max.
- Protect the floor with cardboard or kraft paper after installation, while other finishes are completed on site, to avoid stains and scratches.
- Consult the Corona® Floors and Walls Installation manual.
- The success of the job can be enhanced with the use of appropriate tools and accessories.
- The selection of the most suitable type of Pegacor® for the material of the product and the surface on which it is going to be installed is important.
- It is recommended to use a RUBI brand white rubber mallet (marketed by Corona®) to fix the piece.
- Avoid black or gray mallets that can stain the surface.
- Grout after 24 hours of product installation and Concolor® is recommended.
- Concolor® narrow joint is recommended for 1-5 mm joints or Concolor® universal joint for 5-15 mm joints, Corona® brand.
- The application of the nozzle and the removal of all the elements are leftovers that can scratch the piece.
- If there are remains of material, they should be removed with a non-abrasive sponge and plenty of water without rubbing the piece.
- Daily cleaning should be done with clean water and a mop, under no circumstances should you use varsol or any other detergent with a fatty content.
- To preserve your product well, we recommend cleaning only with a cloth dampened with water and neutral liquid soap.
- It is recommended to remove stains immediately they occur, especially when they are caused by black agents such as coffee, chocolate, dye, soda, wine, blackberry juice, mango and any citrus.
- All glossy products are susceptible to product scratching.
- Our products are made with materials that are sensitive to being scratched by strong and/or abrasive cleaning elements.
- In case of disagreement with the product, suspend the installation and contact the point of sale where you bought the product.
- The Corona® guarantee only applies if all specifications are taken into account.